DinghyGo Inflatable sailing Tender
The rigid inflatable sailboat
Video: See the DinghyGo in action
Dinghygo Overview
Lightweight, portable, functional, and fun, the DinghyGo Orca is available in 3 sizes. All have generous load capacity from 4 inflation chambers, including a high-pressure drop-stitch floor. It’s perfect as a yacht tender or just for fun on the water under sail, motor, or paddle. It’s transported or stored in 2 bags weighing under 110 lbs and assembles in 20 minutes or less.
Features of the DinghyGo Inflatable Boat
Minimalist Design
DinghyGo took a minimalistic approach, a hallmark of northern European design, and applied it to the engineering of the Orca.
No unnecessary fittings or shackles when simpler solution works just as well or better
Strong yet soft Dyneema rigging instead of steel stays
Utilizing common off-the-shelf components
Resulting in a portable sailboat that’s very simple to rig/derig and maintain.
practical details
Even with a minimalist approach, it retains the soul of a sailor’s boat.
Generous sail area
Deep daggerboard to match
Boom with an outhaul
Flattening reef for the mainsail
Adjustable mainsheet traveler bridle
Daggerboard trunk that rolls up and seals water out when not in use
Every detail was contemplated and intentional.
Why DinghyGo?
Go By Sail
For leisure or for purpose, solo or with a crew, and room for gear, or even a furry friend.
Go By Motor
Remove the sail, mast, rudder, and daggerboard, mount a motor or paddle (oars included) and you have yourself a tender from ship to shore.
Go By Car
Once disassembled, the entire boat can fit in the trunk of a subcompact car that you can literally take anywhere.
Photo: DinghyGo Orca 280
About the Manufacturer
Design and development of the original “Dinky 0.9” prototype started in 2007 by the Aquacrafts team in the Netherlands. But it wasn’t until 2013 that the first DinghyGo was introduced to the world at the Amsterdam Boat Show HISWA. Launch in UK and Germany followed soon thereafter in 2014 featuring the DinghyGo 2. The Nomad 3 in 2016, with the latest Orca 325 and compact Nomad S in 2018, and most recently the Orca 280 and Orca 375 in 2020 at Boot Düsseldorf.
Sailing Awaits is excited to present and support the DinghyGo Orca in the USA. in 2023, their 10th year anniversary.
Frequently
Asked
Questions
-
12 months outside of the European Union
-
Valmex® manufactured by Mehler Texnologies in Germany. This PVC fabric is regarded as one of the best for boats in the world for over 60 years and it has been extensively tested in the harshest conditions around the globe.
In addition, the seams are thermo-bonded/thermo-welded, which is 4 times stronger than adhesive-based seams. Welded seams is a mechanical bond as opposed to a chemical bond, and actually stronger than the fabric itself.
Have Questions?
We’re only an email or a phone call away.